Mastering Assessment Validation: How to Validate Assessments
Mastering Assessment Validation: How to Validate Assessments
Blog Article
Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.
Exploring the Two Types of Assessment Validation
Assessment Validation: What It Is
As noted earlier and in previous blog posts, validation comprises two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this write-up, we will focus on assessment tool validation.
How Assessment Tool Validation is Conducted
With a clear understanding of the two types of validation, let’s focus on assessment tool validation.
Optimal Timing for Assessment Tool Validation
Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:
- resources are updated by you
- new training products are added by you on scope
- you review your course against training product updates
- when learning resources are identified as a risk during your risk assessment
ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.
Determining Training Products for Validation
Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.
What Do You Need for Assessment Tool Validation?
Course Materials
To validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.
Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.
Team for Validation
Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
Collectively, your validation panel should have:
Relevant vocational competencies and industry skills for the unit being validated
Up-to-date knowledge and skills in vocational teaching and learning
Any of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its future version
Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.
Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Are equal opportunity and access ensured for everyone in the assessment process?
Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Essential Rules of Evidence
Validity – Is the evidence showing that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Do the assessment tools correspond to current units of competency and industry practices?
Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To avoid employing learning resources that leave unit requirements unmet, be sure to adhere to these guidelines:
Act read more on Your Words
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
change diapers
prepare bottles, bottle feed infants, and clean equipment
prepare solid foods and feed babies
respond to baby signs and cues appropriately
prepare infants for sleep and soothe them
monitor and foster age-appropriate physical exploration and gross motor skills
Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.
Complete Compliance or Not Competent
Observe the lists. As mentioned above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What types of information can be included in a work package?
The answer might include:
Required resources
Corresponding costs
Length of activities
Assigned functions and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:
Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Possible answers include, but are not limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolating, engineering controls, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery – isolation, engineering, administrative controls
Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.